For commercial and institutional application such as stores, schools, offices, transportation terminals, churches, entrance ways. Units can be wall or ceiling mounted, surface, semi-recessed or fully-recessed.
In-Built thermostat - 50-90°F range that can be bypassed to use remote wall thermostat
24v transformer and relay
Replaceable dust filter
Two speed (1,550 / 1,400 rpm), shaded pole, resilient mounted, permanently lubricated fan motors
Heat output and fan speeds controlled independently
Beige powder coated finish on 18 ga. steel housing - 9.5" Deep x 25" High
Steel sheath finned tubular elements
Easily removable fin and element decks for simplified maintenance
Full length capillary automatic reset thermal protection with secondary manual reset
For commercial and institutional application such as stores, schools, offices, transportation terminals, churches, entrance ways.
Heater Length: 33"
Low: 3 KW
High: 5 KW
Low: 10,239 BTU's
High: 17,065 BTU's
low: 15.4/9.2 AMP's
High: 25/17.6 AMPS
low: 230 CFM
High: 250 CFM
Weight: 99 lbs
Overall Dimensions: 25" H x 33" W x 9" D
33" Duct Collar
The same model is used for the inlet or outlet. If duct collars are required for both inlet & outlet then 2 must be ordered
33" Recess Trim Frame
Recessing Trim Frame should be ordered to "trim-out" any recessed or semi-recessed installation.
5/3 KW Cabinet Space Heater
27.25" H x 35.25" W x 9" D
We're sorry, we have no additional specifications for this product.