Peerless Vector Pro II Universal Spider Projector Mount

Awesome product very easy to install and works with just about any projector that is made to be hung from a celing

I like the easy on, easy off. Or the twist and turn action to remove projector from mount.

I spent a half hour ensuring all the parts were there and trying to understand the install process. The manufacturer's manual could be better written. After that the install was quite easy. Works well, no issues.

Awesome. Canon wanted 4 times the price to accomplish the same task. This item was so easy to use and worked great with the variable postion ceiling plate that was purchased as a combo.

If you need your projector mounted from the ceiling you can't beat the rugged quality of this unit. The 4 adjustable arms (we needed only three) have virtually infinite positions they can be configured. The universal head unit can allow your projector to be positioned at nearly any position. You will need to purchase a pipe measured to the length you need, and have both ends threaded, and a pipe stand, from your local [@] (home store), and maybe a piece of 3/8 inch plywood cut to your dimensions. Cut a hole in the plywood for the pipe to pass through, then screw the pipe stand on the opposite side of the plywood from the projector. Thread one end of the pipe into the pipe stand and the other end into the slotted collar provided in the Mount kit.Your application may be different, but you would be hard-pressed to find a better Mount to suit your needs.

High Quality machined parts. I bought some extension pipes from [...](1-1/2 NPT galvanized pipe) which worked great. Easy to assemble. I was impressed. We had another teacher purchase one as well. Her's was in black and it was also of very high quality.

I did a lot of research and purchased this mount because of the other comments. In general it was easy to install and fit the projector without any problems. Looks good installed, but the key component of the mount is less the adequate. The mount is all metal construction except the quick connect between the ceiling mount and the projector which is plastic. Experienced a lot to trouble leveling the projector due to flex in the connector. Hope it holds but will be adding a safety cable in just in case.

I used these mounts to replace some proprietary mounts in classrooms. The mounts were easy to install and easy to adjust. There are so many options with mounting that you should be able to make it work with most any mountable projector. I was able to get all 4 mounting points to attach. Also the quick release makes servicing the projector a breeze.

I used to install a projector in a conference room, very easy nice look

Don't by the extension column go to [...] plumbing dept and get a section of pipe. Paint or use black electrical tape for much less.