Special Nonexistent Furniture
Skip to Main Content
FREE 2-Day Delivery

Smart Mount Tilt Universal Wall Mount for 32" - 50" Plasma/LCD by Peerless

$170.00 46% Off

Free Shipping
Want it ? Order .

Finish: Black

Product Information:

  • 10+ in Stock
  • Overall: 18.5" H x 30.87" W
  • Overall Product Weight: 7.94lbs

Shipping & Returns

Free Shipping

Ships to:   

Ships via:  FedEx/UPS

Delivery Estimates

Enter your shipping zip code to calculate shipping estimates

Get Delivery Estimate

Return Policy

30-Day Return Policy


Overall Rating


Based on 87 reviews


Customer Photos

Add your own photo
1 2 3 4 ... 18
Sort by:
  4.0 stars
Great product from Macomb, IL on 03/06/2015 – Verified Buyer
Perfect mount for a decent price. Easy to install and allows TV to tilt.
Was this helpful? Yes 0 No 0
  4.0 stars
Good Item from WEst Long Branch, NJ on 10/29/2014 – Verified Buyer
Does the trick - easy to hang and secure. If you're looking for something simple to be flat against the wall, it's good. Doesn't swivel so don't count on that.
Was this helpful? Yes 0 No 0
  5.0 stars
Good Product from Summerville, SC on 02/17/2013
Overall happy, but I wish I had just a little more room behind the TV to work with the cables. Just remember this is a low profile mount.
Was this helpful? Yes 0 No 0
  4.0 stars
t v mount from Auburndale, FL on 04/22/2013 – Verified Buyer
item came as expected. the item was sturdy and good for the price. assembly was fairly easy. no buyers remorse.
Was this helpful? Yes 0 No 0
  4.0 stars
Excellent Mount for LCD TV from Lockport, LA 70374 on 06/19/2008 – Verified Buyer
My Philips 32" LCD was 21½ inches tall, and I had 22½" above a closet door to fit it in my small bedroom. I spent about half a day measuring and calculating the exact spot to bore the holes for the rack. After installing the rack, I mounted the TV onto it, and it cleared the ceiling and the top of the door by a half inch each. BUT, after putting the TV at the proper angle and tightening all the set-screws etc., the TV was 1/4" too low and the top of the door hit it when opened, and there was about a 1" gap between the top of the TV and the ceiling. I took the whole thing down, plugged the holes that I had made, drilled new holes about a half inch higher, and put it up again. That worked just fine, EXCEPT THAT after a few minutes in that position the TV again came down about 1/4" or so, and the door scraped the bottom of the TV.
I THEN DISCOVERED WHAT TEH PROBLEM WAS: The top bolt HOLES attaching the TV to the mount were OBLONG rather than round, and (following the instructions!) I had been careful not to over-tighten the bolts), but obviously I had not tightened them sufficiently to keep the TV from moving from the top of those holes to the bottom, so the TV was moving down on the mount. What I had to do (rather than take it all down again) was to use a very short screwdriver, have someone lift the TV so that the bolts were at the TOP of the oblong holes, and then tighten those bolts as much as I could with that short screwdriver, and that did it! This is why my principal negative comment about the mount was that these holes were OBLING rather than round.
The only other problem I had was with the spacers which came with the unit. There were two sizes, but neither size fitted the 6MM bolts which my TV called for. (I needed the spacers, so I managed to drilled out the holes in the smaller ones to fit my bolts. If I hadn't done this, I would not have been able to tighten those bolts even with the short screw driver.)
Otherwise the mount was PERFECT for my situation, and it is working perfectly since then.
Many thanks,
James B. Songy
Lockport, LA 70374
Was this helpful? Yes 0 No 0
  4.0 stars
Easy install and great price! from Dallas, TX on 02/02/2009 – Verified Buyer
I used this mount to put my 50" plasma above my fireplace. It was actually very easy to install... just follow the directions. Adjustability was good. The only small thing I had an issue with was that I found the screws that are used to tighten the TV to an arbitrary viewing angle a little tricky to use, and I really had to crank them down to get them to lock the screen at an up-angle (to install the HDMI and other Video cables. Overall, once the cables were installed and the TV was put back in a down-angle viewing position, all was good. I would recommend this product for the sturdy nature of the components, the ease of installation, and the price.

One small trick I learned... I installed the TV to the wall first, and the cables second. I just used a hand-held mirror behind the TV to insert the cables properly. Probably what everyone does, but I've never read that in a review before so I thought I might help out any other first-timers.
Was this helpful? Yes 0 No 0
  5.0 stars
Exactly as described from Nashua, NH on 10/22/2012 – Verified Buyer
Item arrived very quickly and in perfect shape, this was easy to install and looks great on my wall. Great shopping experience, I will come back again.
Was this helpful? Yes 0 No 0
  5.0 stars
very strong mount from Paducah, KY on 11/05/2012 – Verified Buyer
This is a very strong mount. I really like the peerless mounts. They are simple to use and very simple to install.
Was this helpful? Yes 0 No 0
  5.0 stars
Holds Weight and Ships Fast from Stoneham, MA on 01/30/2012 – Verified Buyer
Peerless makes very sturdy products. We have had this mount holding a tv that is about 80lbs for at least 6 months and there are no issues. The tilt is nice in case you want to test it from different angles.

Also the design is nice and easy to take off the wall if you need to (besides the tv weighing a ton).
Was this helpful? Yes 0 No 0
  3.0 stars
Could be better from Teaneck, NJ on 10/22/2014 – Verified Buyer
This mount gets the job done as far as holding the television to the wall, but it wasn't as easy to attach the bracket to the back as other mounts I've used in the past.
Was this helpful? Yes 0 No 0

Questions & Answers

No one's asked a question yet—why not get the conversation going?

Related Products
Description: Information. The pull-out swivel mount is designed to work with most Plasma or LCD flat panel displays. Compatible with VESA® 100 and 200 hole patterns through the integrated adapter plate, the ultra-thin design keeps the screen close to the wall ...
Description: Information. No wall space? No problem. The ceiling is a great place to mount a flat panel when there is no wall available. Ceiling installation is made simple with this one-two-three design. Simply attach the ceiling plate, attach the adapter ...
Description: Information. This Full Swing TV Wall Mount is a completely full motion mount for large size TV. This flat screen cantilever TV wall mount is our latest breakthrough in flat panel mount design. The TV mount boasts integrated strength through ...