Special Nonexistent Furniture
Browse by Brand > Penco > 

Locker Accessories by Penco

    Toll Free: 800-316-2207
Locker Accessories by Penco

96" & 108" & 120" & 144" Pallet Rack Beams - Clear Span
Product Features
  • Both the overlapping seam and the beam end connector are securely MIG welded for strength
  • The face of the beam has an M-design recessed configuration for added strength, protecting the locking key, and to accept pressure sensitive labeling
Penco has engineered its roll-formed one piece beams to achieve the highest possible strength-to-weight ratios in the most frequently desired load ratings through the use of efficient design and high strength steel.
More Options »

96" & 108" & 120" & 144" Pallet Rack Beams - Clear Span

by Penco

List Price: $199.99
From $159.99
Free Shipping
  (2)
Clipper Parts - Side Sway Braces (Pair)
Product Features
  • Side sway braces eliminate front to back sway
  • Comes in pairs
  • Braces fasten to the flanges of the front and rear posts
  • Installation Services Now Available! Call for details
Sway braces provide stability for open type shelving. They are furnished in sets of two braces to fasten to one back or side of a unit.
More Options: Depth »

Clipper Parts - Side Sway Braces (Pair)

by Penco

From $20.90

Slope Top Kits (Set of 3)
Product Features
  • 3 tops
  • 3 backs
  • 4 ends
  • Notes: Not for use on invincible II or all-welded lockers
Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as storage areas. Slope top kits are designed to convert stock flat top lockers into slop top lockers in groups of 3 wide. Each kit contains
More Options »

Slope Top Kits (Set of 3)

by Penco

List Price: $45.75
From $35.99

RivetRite Parts - Angle Posts, Standard 1-1/2" x 1-1/2"
Product Features
  • Punched for shelf adjustment on 1-1/2'' centers
  • Installation Services Now Available! Call for details
Use as an upright for standard units.
More Options: Height »

RivetRite Parts - Angle Posts, Standard 1-1/2" x 1-1/2"

by Penco

From $20.99

  (2)
Pallet Rack Upright Frames - 3" x 2 1/4" Post
Product Features
  • Type G *18,904# Max., Post Gauge 14
  • Upright frames are furnished completely fabricated, welded into rigid units
  • Beam heights adjust on 3'' vertical centers, and are independent on each side of the frame
Penco Pallet Rack is a carefully engineered system designed to provide highly efficient storage of palletized items. Combining design excellence with the use of high strength steel to achieve a superior strength to weight ratio, Penco Pallet Rack can handle nearly any job you give it. The basic components of Penco Pallet Rack are upright frames and beams. Each is manufactured to exacting tolerances to provide many years of dependable service at their rated loads.
More Options »

Pallet Rack Upright Frames - 3" x 2 1/4" Post

by Penco

List Price: $249.99
From $194.99
Free Shipping
  (1)
Locker Parts -Packing House Kit for 3 Wide
Product Features
  • Overall Height - Top to Bottom: 16
  • Overall Product Weight: 15lbs
Packing house legs raise lockers 16'' above the floor to facilitate cleaning. Must be used on lockers with standard 6'' legs.

Locker Parts -Packing House Kit for 3 Wide

by Penco

List Price: $139.00
$94.99
Free Shipping
Product Features
  • Overall Product Weight: 1lbs
Air dry touch up paint for all lockers.
More Options: Color »

Touch Up Paint - Air Dry

by Penco

List Price: $20.99
$17.99

Product Features
  • Overall: 2" H x 0.25" W
  • Overall Product Weight: 0.3lbs
It is recommended each locker and bench pedestal be securely anchored to the floor. [See related products]Notes:

Locker Accessories - Concrete Floor Anchor

by Penco

$8.45

  (1)
Product Features
  • Installation Services Now Available! Call for details
For left to right and front to back shelf support.
More Options: Width »

RivetRite Parts - Standard Double Rivet Angle Beams

by Penco

From $20.90

Product Features
  • Type F *15,381# Max., Post Gauge 14
  • Upright frames are furnished completely fabricated, welded into rigid units
  • Beam heights adjust on 3'' vertical centers, and are independent on each side of the frame
Penco Pallet Rack is a carefully engineered system designed to provide highly efficient storage of palletized items. Combining design excellence with the use of high strength steel to achieve a superior strength to weight ratio, Penco Pallet Rack can handle nearly any job you give it. The basic components of Penco Pallet Rack are upright frames and beams. Each is manufactured to exacting tolerances to provide many years of dependable service at their rated loads.
More Options »

Pallet Rack Upright Frames - 3" x 1 3/4" Post

by Penco

List Price: $149.95
From $99.95
Free Shipping
Product Features
  • Punched for shelf adjustment on 1-1/2'' centers
  • Installation Services Now Available! Call for details
Used as a common post between started and adjoining units.
More Options: Height »

RivetRite Parts - Tee Posts, Standard 3" x 1-1/2"

by Penco

From $66.99
Free Shipping
Product Features
  • Smooth, extra heavy gauge reinforced counter top
  • 3 standard heavy duty hi-performance clipper shelves, adjustable on 1'' centers
  • Box posts at all four corners
  • Notes: Counter top sand fronts may be purchased as separate components. [See related products]
Penco steel counters present an extremely clean, classic appearance for over the counter or stockroom use.One end kit is required for each single unit, or to end a row of units. [See related products]
More Options »

Clipper Specialty Shelving - Counter Shelving Basic Unit

by Penco

List Price: $309.99
From $244.99
Free Shipping
Product Features
  • Overall Product Weight: 0.1lbs
Replacement single prong wall hook for lockers. [See related products]Notes:

Misc. Locker Parts - Single Prong Wall Hook

by Penco

$41.79

  (5)
Product Features
  • Overall Product Weight: 0.2lbs
Replacement double prong ceiling hook for lockers. [See related products]Notes:

Misc. Locker Parts - Double Prong Ceiling Hook

by Penco

$13.93

  (1)
Product Features
  • Overall Product Weight: 0.3lbs
All Penco lockers are designed to accept built-in key locks. [See related products]

Built-in Key Locks with 2 Flat Keys - Dead Bolt, Keyed Differently

by Penco

$19.45

  (2)
Product Features
  • Punched for shelf adjustment on 1-1/2'' centers
  • Installation Services Now Available! Call for details
Use as an upright for standard units.
More Options: Height »

RivetRite Parts - Angle Posts, Heavy Duty 1-7/8" x 1-7/8"

by Penco

From $30.99

Product Features
  • 18 gauge metal
  • Notes: Not for use on all-welded lockers
  • Installation Services Now Available! Call for details
Front Bases are designed to fit between standard Penco 6'' legs. They present a clean and flush appearance and prevent the accumulation of dust and dirt under the lockers.
More Options »

Front Bases - for Lockers with Legs

by Penco

From $12.99

Product Features
  • Installation Services Now Available! Call for details
For left to right and front to back shelf support (lower profile than other double rivet beams).
More Options: Width »

RivetRite Parts - Double Rivet Zee Step Beams

by Penco

From $9.98

Product Features
  • Divider portion shall be sloped 45 degrees at front, 1/2'' radius at front corner
  • No hardware is needed
  • Notes: Not for use with modular drawers
  • 20 gauge steel manufactured to give infinite lateral adjustability
This divider is formed to fit around the front and rear flanges of a shelf, and can be positioned anywhere on the surface. No hardware is needed.
More Options »

Clipper Parts - Sliding Dividers

by Penco

List Price: $11.99
From $11.98

Product Features
  • Erectomatic post and clips are for erectomatic shelving units only
  • Installation Services Now Available! Call for details
More Options: Height »

Erectomatic Shelving Posts - H-Posts

by Penco

From $77.99
Free Shipping
Product Features
  • Notes: Particle board is not part of the QuickShip program
  • Notes: Wire deck is available for RivetRite as an alternative
Penco 1-M-1 interior grade particle board is available pre-cut to fit, or from your local building materials supplier. Other types of deck thicknesses may be desired based on load or use. Particle Board Capacities
More Options »

Particle Board Decking

by Penco

From $38.95

Product Features
  • Installation Services Now Available! Call for details.
Used to space back-to-back units and to top-tie rows across aisles for added stability.
More Options: Depth »

RivetRite Parts - Double Row & Top Ties

by Penco

From $7.98

Product Features
  • Overall: 78" H x 36" W
  • Overall Product Weight: 1.5lbs
Replacement recessed handle/lock assembly for E-Z Bilt Storage cabinets. [See related products]Notes:

E-Z Bilt Replacement Parts - Recessed Handle/Lock Assembly

by Penco

List Price: $30.45
$22.95

  (2)
Product Features
  • 1 tops
  • 1 backs
  • 2 ends
  • Notes: Not for use on invincible II or all-welded lockers
Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as storage areas. Slope top kits are designed to convert stock flat top lockers into slope top lockers in groups of 3 wide. Each kit contains:
More Options »

Slope Top Kits, 1 Wide

by Penco

From $24.45

Product Features
  • Back sway braces eliminate lateral sway
  • Comes in pairs
  • Braces fasten to the flanges of offset angle posts used at the rear of units
  • Braces bolt to each other at the center hole to ease installations
Sway braces provide stability for open type shelving. They are furnished in sets of two braces to fasten to one back or side of a unit.
More Options: Width »

Clipper Parts - Back Sway Braces (Pair)

by Penco

From $18.99

Product Features
  • Permits 1'' vertical shelf adjustment, using clips or nuts and bolts
  • Can be used at rear of units, or at front and rear
  • Ends of flanges are punched on 3'' centers to accept sway braces or closed panels
A roll formed high strength post which adds rigidity and allows for independent shelf clip adjustments.
More Options: Height »

Clipper Parts - Offset Angle Posts

by Penco

From $10,122.75
Free Shipping
  (1)
Product Features
  • Overall Product Weight: 0.1lbs
Replacement single prong wall hook for use with coat rod. [See related products]Notes:

Misc. Locker Parts - Single Prong Wall Hook, For Use with Coat Rod

by Penco

$17.91

  (1)
Product Features
  • Divider has a beaded front edge for strength and safety
  • Hardware included
  • Installation Services Now Available! Call for details
Used to divide a shelf opening into smaller units.

Clipper Parts - Full Height Dividers

by Penco

List Price: $12.45
$10.12

Product Features
  • Overall: 3" H x 2" W
  • Overall Product Weight: 1lbs
Trim provides a uniform solid look. Trim helps to fill in blank space around lockers to minimize mess and improve apperance. Meant to be used on lockers without legs.
More Options: Color »

Locker Parts -Trim Splice

by Penco

$17.97

Product Features
  • 18 gauge metal
  • Notes: Not for use on all-welded lockers
  • Installation Services Now Available! Call for details
End Bases are designed to fit between standard Penco 6'' legs. They present a clean and flush appearance and prevent the accumulation of dust and dirt under the lockers.
More Options »

End Bases, Single Row - for Lockers with Legs

by Penco

$20.45 - $22.08

Product Features
  • Once beam locking key is engaged, the beam end is prevented from accidental disengagement
  • Beams can be easily removed and adjusted by manually disengaging the locking key
  • Beam ends are manufactured from heavy gauge steel, featuring a sturdy reinforced three prong connection for even load distribution
General duty cross bar supports loads smaller than unit depth on 1-5/8'' step beams. (Not for plywood)
More Options »

General Duty Cross Bars, 16 Ga. - For 1-5/8" Step Beams

by Penco

List Price: $32.12
From $27.99

Product Features
  • Not for use on invincible II or all-welded lockers
  • Installation Services Now Available! Call for details
Trim provides a uniform solid look. They help to fill in blank space around lockers to minimize mess. Meant to be used on lockers without legs.
More Options »

Side Trim, Left Hand

by Penco

From $55.99
Free Shipping
Product Features
  • Once beam locking key is engaged, the beam end is prevented from accidental disengagement
  • Beams can be easily removed and adjusted by manually disengaging the locking key
  • Beam ends are manufactured from heavy gauge steel, featuring a sturdy reinforced three prong connection for even load distribution
Heavy duty flanged cross bar supports heavier loads smaller than unit depth on 1-5/8'' step beams.
More Options »

Heavy Duty Flanged Cross Bars, 16 Ga.

by Penco

List Price: $38.89
From $33.99

Product Features
  • Overall Product Weight: 0.1lbs
Order 2 shelf box guiders for each shelf of boxes. [See related products]Notes:

Clipper Parts - Shelf Box Guide (Ea.)

by Penco

$29.90

Product Features
  • Installation Services Now Available! Call for details
For use as left to right and front to back shelf support
More Options »

RivetRite Parts - Heavy Duty Single Rivet Shelf Beams

by Penco

From $9.98

Product Features
  • Not for use on invincible II or all-welded lockers
  • Be sure dimensions of sloping top correspond with those of the locker
  • Installation Services Now Available! Call for details
Slope tops are often used instead of flat tops to prevent the accumulation of dust and debris, and to discourage the use of locker tops as storage areas. Slope top kits are designed to convert stock flat top lockers into slop top lockers.
More Options »

Slope Top Kits, Individual

by Penco

List Price: $72.00
$35.99 - $53.26

Product Features
  • Overall Product Weight: 2lbs
Replacement ''L'' handle for 42" H x 48" W E-Z Bilt Storage cabinets. [See related products]Notes:

E-Z Bilt Replacement Parts - "L" Handle

by Penco

$53.99
Free Shipping
Product Features
  • Bolted type
  • Hardware included
  • Installation Services Now Available! Call for details
Structurally connects and spaces two rows of rack back-to-back.
More Options »

Rigid Row Spacers, 12 Ga.

by Penco

From $13.98

  (1)
Product Features
  • Overall: 3" H x 74" W
  • Overall Product Weight: 5lbs
Trim provides a uniform solid look. They help to fill in blank space around lockers to minimize mess. Meant to be used on lockers without legs.
More Options: Color »

Top Trim

by Penco

$59.99
Free Shipping
Product Features
  • Hardware included
  • Back panels fasten to the flanges of offset angle posts at the rear of units
  • Center of the back is held tight against a shelf with a ''back panel chip'' furnished with each back
Panels to enclose the sides of closed type shelving provide unit stability while giving greater protection to the shelving contents.
More Options »

Clipper Parts - Back Panels

by Penco

From $78.99
Free Shipping
Product Features
  • Overall: 0.5" H x 13" W x 3.75" D
  • Overall Product Weight: 0.2lbs
Securely anchors all upright frames. [See related products]

Pallet Rack - Concrete Floor Anchor 1/2"-13 x 3-3/4"

by Penco

$11.97

Product Features
  • 18 gauge metal
  • Notes: Not for use on all-welded lockers
  • Installation Services Now Available! Call for details
End Bases are designed to fit between standard Penco 6'' legs. They present a clean and flush appearance and prevent the accumulation of dust and dirt under the lockers.
More Options »

End Bases, Single Row - for Lockers with Legs

by Penco

From $25.99

  (2)
Product Features
  • Front box post
  • 1 pair of side sway braces
  • Notes: Order one open ending kit to end each row
  • Notes: Order end kits in the appropriate depth
  • Installation Services Now Available! Call for details
This kit is used to finish a single unit or to end a row of Clipper shelving units. Constructed of sturdy box posts. This kit comes with 1 pair of side sway braces for stability. Be sure to order the appropriate depth for your Clipper shelving unit. [See related products]Open Clipper End Kit includes:
More Options »

Open Clipper End Kits

by Penco

From $81.99
Free Shipping
Product Features
  • Hardware included
  • Installation Services Now Available! Call for details
Closes the space between the floor and bottom shelf.
More Options »

Clipper Parts - Front Base Strips

by Penco

List Price: $10.99
From $9.98

Product Features
  • Not for use on invincible II or all-welded lockers
  • Installation Services Now Available! Call for details
Trim provides a uniform solid look. They help to fill in blank space around lockers to minimize mess. Meant to be used on lockers without legs.
More Options »

Side Trim, Right Hand

by Penco

From $55.95
Free Shipping
Product Features
  • Manufactured from high strength steel
  • Flush to permit straight-in/straight-out shelf installation or shelf changing
  • Enables full use of the shelf width for storage
  • No dead space behind post

87" Erectomatic Beaded Post

by Penco

$56.99
Free Shipping
Product Features
  • Manufactured from high strength steel
  • Consist of two angle posts welded together
  • Primarily used at the rear of the unit
  • Punched on 1-1/2'' centers to allow quick, independent shelf adjustment

Erectomatic 87" T-Post

by Penco

$63.95
Free Shipping
Product Features
  • Patriot collection
  • Made in the USA
Mounted within the confines of the locker body, the steel drawer features full extension glides for easy access to files or equipment without taking up valuable space when not in use. The ball-bearing glides are rated at 250 lb. capacity for performance and durability.
More Options »

Patriot Locker Drawer Unit

by Penco

List Price: $796.15
From $549.99
Free Shipping

Prev 1 2 Next

Haven't found what you're looking for? Give us a call! Toll Free: 800-316-2207
Related Products
Description: Type F *15,381# Max., Post Gauge 14 Upright frames are furnished completely fabricated, welded into rigid units Beam heights adjust on 3'' vertical centers, and are independent on each side of the frame Beams of any type can be placed ...

ServerT:0.52198791503906