|Product Type: Security safe||Fire Tested Duration: 1 Hours|
|Fire Tested Temperature: 1700 Fahrenheit||Powder Coated Finish: Yes|
|Fire Resistant: Yes||Pry Resistant: Yes|
|Bolt Down: Yes||Capacity: 0.53 Cubic Feet|
|Key Required (Combination And Key Lock Lock Type): Yes||Keypad Lock Included (Programmable Electronic Lock Lock Type): Yes|
Questions & Answers
Gardall Vertical Microwave Safe [0.53 CuFt]
Good company, great products!!!!
Joseph from Mountain Home, ID– Verified Buyer
Good quality product,pleased with the construction and look.
A great safe for the home or small offic
Robert from Levittown, PA.– Verified Buyer
Very fast delivery and a great safe. Instructions are good and the delivery came faster than expected. Very very satisfied!!
It Fit My Space
tbq from Washington State– Verified Buyer
The main reason I got this safe was because it fit the space I had for it to a T. It is a heavy, secure unit. The only drawback is the rotary tumbler set-up. It seems finicky, requiring some jiggling around the last number to get the key to unlock it. Might be worth it to pay the xtra for the digital model. Reason I chose rotary was no need for batteries.
safe from ny, ny– Verified Buyer
i use the safe mostly for passports, papers and other small items. it is small but large enough for my needs. it has all the features I was looking for: hole in the bottom to bolt it to the floor, fire rating, fairly compact size and easy to open electronic lock. while this might not be the safest safe on the market it is certainly the best you can get for the money and more than sufficient for the home.
Build quality is disappointing
Jim from NYC
The safe came with a noticeable scratch on the front which had to be from the factory since the thing came double boxed with foam. There was sharp metal inside that I had to file off since I feared it may scratch some valuables. The plastic tray is completely warped. I wish the door hinges were beefier since they look like you can pry them with a crowbar. However, with that said, the door itself looks like it would be hard to bust open since it locks on two sides. The key and combination lock have a good feel to them. Overall, this safe is far from perfect but for the price, it should get the job done.
southern belle from Lawrenceburg, TN
Just the right size. Easy to use.
Jman from Farmington Hills, Mi
This safe suit my my home needs just fine. No problems.
BROKENSPUR from oklahoma– Verified Buyer
[...]. Very pleased with the quality of the unit. Easy to program, Excelent in all ways.
It Works OK
Onetrack from Dallas Area
Can accept up to two 6 digit codes. Codes can't be shorter. There is no key bypass. The batteries are on the outside so I guess at least you can replace them if they die.
Hodag from SW TN– Verified Buyer
Worked great right out of the boxes [...], and felt lighter than expected. Construction seems tough, however, with the included bolt very useful for in concrete bolt down (not mounted yet while new floors are installed). Highly recommended and budget priced, with a good amount of space.
The evolution of Gardall can be traced all the way back to the 1930's when a successful Syracuse retailer named George Bloch began a safe manufacturing plant by the name of Protectall. With Bloch's sharp wit and business savy Protectall was soon doing a very respectable business. All of this fame and prosperity soon attracted the attention of a major competitive manufacturing rival Mosler Safe Company, who eventually bought the company for a sum of $1 million.
After the acquisition, Edward Mosler was appointed to head the company in Syracuse. With the help of Henry Bluestone, who ran the sales department when Bloch owned Protectall, Mosler successfully ran the company until 1949. At that time, Mr. Mosler Sr. decided to close the Syracuse plant and consolidate it into the main Mosler facility in Hamilton, Ohio.
At that point, Bluestone decided to start a safe manufacturing company of his own and named it Gardall Safe Corporation. After soliciting and eventually recieving some badly needed financial aid, Bluestone set up a crude, modest and mostly under-capitalized manufacturing plant.
During that time, Gardall was located in a building that was owned by the Falso family, also owners of Thor Metal Products. Gardall was experiencig severe cash flow problems and Bluestone was needing some help to stay alive. Bluestone approached the Falso's with an offer to purchase the controlling share of the company. He knew that with their sheet metal fabricating knowledge and ability to invest much needed liquidity into the business, he could turn Gardall into a profitable business.
Adolph and Raymond Falso accepted Bluestone's offer in 1970 and purchased Gardall Safe Corporation. Bluestone remained with the company doing what he did best, sales.
In 1978, Adolph Falso became a full-time employee of Gardall as its president. Under his leadership, Gardall continued to improve the quality of its products and introduced many offerings to the line. After almost 30 years of selling directly to dealers, Mr. Falso decided that the proper selling channel for safes was through regional distribution. In 1985 he began the process of converting his dealer business into a distribution-based business.
In 1986, Gardall was purchased by David Patton and Ed Baroody. At the time Baroody, a corporate accountant, was vice president of finance for a division of Shell Oil. Mr. Baroody assumed the role of President of Gardall.
Today Gardall Safe Corporation sells products in all fifty states and around the world. Gardall has become a recognized leader in residential, small business, and commercial grade safes. The quality and integrity established by George Bloch continue today. Modern manufacturing designs allow Gardall to continue to be recognized for it's security and functionality.