|Product Type: Standing heater||Finish: 1: Black|
|Finish: 2: Bronze||Finish: 3: Brown|
|Finish: 4: Copper||Finish: 5: Stainless Steel|
|Material: Stainless Steel||Hardware Material: Steel|
|Heat Source: Propane||BTU Output: 46000 BTUs|
|Ignition Type: Piezo ignition||Fuel Capacity: 20 Pounds|
|Fuel Included: No||Heat Range Diameter: 18 Feet|
|Safety Shut Off: Yes||Pilot Light: Yes|
|Tip Over Shut Off Safety Switch: Yes||Anti-Tilt Safety Device: Yes|
|Portable: Yes||Wheels: Yes|
|Lighted: Yes||Indoor Use: No|
|Commercial Use: Yes||Product Care: Clean with soft cloth once cooled down|
|Country of Manufacture: China||Powder Coated Finish (Mocha and Stainless Steel, Mocha, Hammer Tone Bronze Finish): Yes|
|Assembly Required: Yes|
|Product Warranty: 1 year|
|ETL Certified: Yes||CSA Certified: Yes|
Great performance, Good price.
Michael from Providence, RI – Verified Buyer
We are happy with our purchase of this heater. We are using it in a confined space and the heat production is what we were looking for. We would buy this product again if we were to be looking for it again. Appearance of base and pole are good quality, access to propane tank is easy for an adult but not for a child, as it should be. Lighting is fairly easy though it takes some practice to understand the purging of air and lighting of pilot process. Adjustment of flame/heat is easy. In still air, heat distribution is about 8 feet in all directions. In light wind, cut that down to 4 feet. Some type of wind barrier, more than 8 feet away, is advisable, though certainly not any flammable material that could blow up to the Heater. It is a live and massive set of flames after all. Product description should include requirement that clearance above the top of the heater should be at least 3 feet away from any enclosure, such as a ceiling or roof. Item height is approximately 7 feet. Assembly instructions suggest 60 minutes for assembly. I am handy with assembling items. I am an avid reader of instructions, perhaps to a fault. Reading and following the instructions provided was slightly challenging. Actual assembly time approached two hours, in part due to a short work stoppage to remove a small metal splinter earned while screwing in one of the screws provided. Once assembled, product appeared as expected and performed as expected. We are pleased with this purchase and would repeat it. The following are recommendations to consider during assembly. You may not need to read on if you are only at the point of considering the purchase. Package Contents: Note that you will find you have an extra Anchoring Arm and Pin. I presume they provide it in case you choose not to use the Wheel Assembly. Unfortunately, the instructions fail to note this. Step 3: Cylinder Holders: instructions should point out the obvious, that these are designed to screw INTO the sides of the propane tank to hold it secure. Also, assembler is advised to note positioning of support arm holes versus cylinder holder holes since you may want to put a support arm on first if it is right behind the cylinder support holes for that location. Step 9: Removal of plastic wrap from reflector shield parts: Give this to someone elsed to do while you are assembling. It takes much too long! Also, note that one of the parts has a sticker UNDER the plastic wrap which also needs to be removed. Step 10: refers to Barrel Bolts. Know that these are also called Reflector Studs on the packaging.
Good Looking and Easy to Assemble
Eric from West Roxbury, MA – Verified Buyer
This propane heater is good looking and is made of heavy grade metal. It was pretty easy to assemble, only took me about 35 minutes and I was up and warming. Definitely throws off some good heat but do plan on being realistic about its capabilities. I've got a 15 x 20 deck and I can feel the heat from everywhere on the deck, but it is certainly warmest within 5 feet of the heater. If you've got a breeze this is going to be useless to those upwind of the heater. My wife and I comfortably had dinner outside on a night where it was about 55 degrees, but much colder and it wouldn't have been comfortable without blankets. All in all a good purchase and I'd buy it again.
I worried for the wrong reason
Edmund from Denver, CO – Verified Buyer
When I got this for such a reasonable price, I assumed that it wouldn't last. Or that it would be poorly made. Both could have not been further from the truth. It IS well made and it HAS lasted and lasted through summers and winter, outside in the elements the whole time. No rust. No wear. And it uses very little propane. Sorry that I waited so long to buy it.
Great Outdoor Patio Time
Bradley from Spokane Valley, WA – Verified Buyer
Living in the northwst and enjoying outdoors and evenings, we needed a little assistance in keeping warned. This is the ticket! We make fewer trip to the wood pile, but now enjoy both, a larger area of warmth and the light and heat of our fire pit. The patio heater feally filled the walking and table sitting area with the right amount of comfort. My neighbors love the idea and are looking for these, of coarse I told them where to get the best deal, "See Wayfair" I say to them all. Great deal and great service from Wayfair. Thank you Wayfair! Brad K
Pretty good little gadget
Steve from Texas – Verified Buyer
I haven't had a chance to use this yet. It's still been over 100 degrees most days out here in Texas. But I did get it all put together and ready to go. Let me tell you, assembly is a bit of a project. That head is very heavy and the stainless steel that you have to screw into is very light. I'm going to have to super glue some nuts on the back of it to get those screws to hold it a bit tighter. I thought I'd be able to take it apart to store it. Ya know, where you see those two posts come together But once you get those two posts together it's impossible to take them apart. It just can't be done. It looks great and it's very tall. For under $150 bucks I'm pretty impressed. Can't wait for it to cool down so we can use it.
Very nice but a little unsure
Edward from Dracut, MA – Verified Buyer
So received this and put it together, this baby is beautiful. When my neighbor saw it he was blown away by the quality of it. That being said we had a very very windy day and I can swear that now looks a little tilted. I haven't gone out yet to see what is bent but think it's the three poles under the base. I'm sure this will be nothing and it will be fine. Pick up a cover is my only recommendation and a stool cause this this is huge..lol
Great heat and great price!
David from Colchester, VT – Verified Buyer
Assembly wasn't bad, took about 30 minutes, the heat it hives off is great, when it's not windy. I'm very happy with this product.
This was a gift for my son and daughter in law!.
Cynthia from Oakland, TN – Verified Buyer
They are building a new home and have everything. They will have a great outdoor entertainment area and were beyond thrilled at the quality of this item. I was proud to be able to give something they were surprised to get and something they will get so much enjoyment out of. They are ordered a second one so they will have matching items. Great purchase and they think I'm great!!!
Pleased as punch!
Tyler from Virginia – Verified Buyer
I'm overall pleased with the patio heater. Seems to be a good quality heater for the price and is pretty much everything we were expecting it to be. Not a bad purchase so far at all.
Kelly from South Lake Tahoe, CA – Verified Buyer
The quality exceeded my expectations, it is beautiful. The directions were easy to follow and came together quickly